|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 55 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 2050kv
Max current: 8A
No load current: 7.4V/0.20A
Internal resistance: 0.23 ohm
Weight: 16g (not including connectors)
Diameter of shaft: 2mm
Dimensions: 22x23mm
Test Data:
7.4v
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 85 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1600kv
Max current: 9A
No load current: 11V/0.5A
Internal resistance: 0.18 ohm
Weight: 25g (not including connectors)
Diameter of shaft: 3mm
Dimensions: 27x23mm
Test Data:
|
|
|
|
|
Specification:
Dimension: 23mm x 18mm, 31mm(with shaft)
Weight: 12g (kv2900) (not including connectors)
Diameter of shaft: F2mm
Length of front shaft: F8mm
Lamination thickness: .2mm
Magnet type: 45SH
Voltage: 7.4V
Amp: 5.8A
Thrust: 165g
Propeller: 6030
|
|
|
|
|
C1818 Micro brushless Outrunner 3500kv (9g)
Specification:
Diameter: 18mm
Length: 19mm
Shaft: 4mm
Weight: 9g (with 10cm wire)
Power: 40W
Turns: 25
Resistance: 493
Idle Current: 0.3A
Max amp: 10A (15sec burst)
Voltage: 2-4cell Lipoly
|
|
|
|
|
An excellent motor for planes up to 220 grams (8 oz) using 2 li-poly cells.
Very lightweight at 19 grams including, with an integrated prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and firewall mount inbuilt. Great for small 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz.
Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.
The motor features a 3mm hardened steel shaft, dual ball bearings, integrated prop saver.
|
|
|
|
|
Turnigy 1811 Brushless Indoor Motor 1800kv
Specification:
Dimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11g (kv1800) (not including connectors)
Diameter of shaft: F2mm
Length of front shaft: F8.3mm
Lamination thickness: .2mm
Magnet type: 45SH
|
|
|
|
|
Specification:
Dimension: 23mm x 24mm, 34mm(with shaft)
Weight: 20g (kv2300) (not including connectors)
Diameter of shaft: 2mm
Length of front shaft: 9.8mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Prop: EP7x3.5
Thrust: 235g
Power: 76W
For 200~300g model airplane (Indoor).
|
|
|
|
|
Turnigy 1811 Brushless Indoor Motor 3800kv
Specification:
Dimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11g (kv2300) (not including connectors)
Diameter of shaft: ÂF2mm
Length of front shaft: ÂF8mm
Lamination thickness: .2mm
Magnet type: 45SH
|
|
|
|
|
11500KV Brushless Main Motor for M5 Helicopter
Specification:
RPM/V: 11500KV
Diameter: 14mm
Motor Length: 10mm
Overall Length: 21mm
Shaft: 1mm
Weight: 4g
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 50 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 2200kv
Max current: 7A
No load current: 7.4V/0.45A
Current capacity: 8A/15sec
Internal resistance: 0.25 ohm
Weight: 14g (not including connectors)
Diameter of shaft: 2mm
Dimensions:
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 55 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 1680kv
Max current: 8A
No load current: 7.4V/0.20A
Internal resistance: 0.32 ohm
Weight: 16g (not including connectors)
Diameter of shaft: 2mm
Dimensions: 22x23mm
Test Data:
7.4v
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 77 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1380kv
Max current: 7A
No load current: 8V/0.4A
Current capacity: 9A/15sec
Internal resistance: 0.33 ohm
Weight: 24g (not including connectors)
Diameter of shaft: 3mm
Dimensio
|
|
|
|
|
Specification:
RPM/V: 1350Kv
Cell Count: 2s~3s Lipoly
Max.current: 10A
Max Watts: 120w
No Load Current: 0.3A/7.4V
Dimensions: Φ28mm×16mm
Shaft: 3mm
Weight: 26g
Max Thrust: 245g
|
|
|
|
|
Dimension: 31mm x 23mm (including mount)
Weight: 25g (kv1800) (not including connectors)
Diameter of shaft: 3mm
Lamination thickness: 0.2mm
Specification:
Battery: 3 Cell 3S/11.1V
RPM: 1800kv
Max current: 10~12A
No load current: 7.4V / 0.6A
Current capacity: 16A/20sec
Internal resistance: 0.145ohm
Dimensions: 12x30mm
Pull: 320g ~ 450g
Prop: 6x3 ~ 9x4.7
ESC: 20A
Max Current: 14A
Battery Type: 2~3S Only
Suited for Mini indoor planes.
|
|
|
|
|
Turnigy L2205-1350 Brushless Motor (100w)
Specification:
Dimension: 28mm x 17mm
Weight: 30g (50g with all fittings, connectors & prop driver)
Kv: 1350rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 100w
Max Current: 13.5A
No load Current: 0.3A
Diameter of shaft: 2.3mm
Thrust: 450g
ESC: 18A
|
|
|
|