|
KDA Outrunners
|
|
Scorpion Motors
|
|
TURNIGY
|
|
Car Motors
|
|
Motor Mounts
|
|
TURNIGY RotoMax
|
|
Outrunners by size
|
|
EDF Motors
|
|
Boat Motors
|
|
NTM Series
|
|
TURNIGY EasyMatch
|
|
DR Mad Thrust
|
|
TURNIGY XP
|
|
Heli Motors
|
|
Motor Parts
|
|
TURNIGY SK
|
|
|
|
All motors are not include female gold connector and heatshrink tube in accessories packing.
iPower 4006Q-14 530KV:Brushless Quadcopter Motor
Supplied with mount and prop adaptor,gold connector soldered,450MM LONG CABLE.
Specification:
Kv: 530rpm/V
Turns: 16T
Resistance: 0.075Rm
Idle Current: 0.8A
Can size: 50mm
Can Length: 10mm
Shaft: 3mm (Includes Prop saver mount for GWS style props)
Sugg
|
|
|
|
|
Turnigy L2508A-3500 Brushless Heli Motor (200w)
Specification:
Dimension: 25mm x 20.5mm
Weight: 31g
Kv: 3500rpm/V
Voltage: 7.2v (2s)
Max Power: 200w
Max Current: 27A
No load Current: 1.1A
Diameter of shaft: 2.3mm
ESC: 30A
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 890kv
Max current: 14A
No load current: 8V/0.7A
Current capacity: 18A/15sec
Internal resistance: 0.20 ohm
Weight: 67g (not including connectors)
Diameter of shaft: 4mm
Dimens
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ
|
|
|
|
|
The Turnigy TrackStar Brushless Motors offer outstanding performance at an incredible price!
Featuring a quality CNC motor can, hand-wound high purity copper windings and powerful
sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else!
This TrackStar brushless motors make a great upgrade for 1/5th short course trucks,
monster trucks, buggies or anything els
|
|
|
|
|
XK2845-B-2000 ot/V - střídavý motor s vnitřní rotací
Specifikace:
Počet pólů: 4
Max.proud: 25 A
Max. napětí: 11.1 V
Otáček na Volt:2000 ot/V
Vnitřní odpor: 0.0490 Ohm
Odběr naprázdno: 0.8A (při napětí 7.4 V)
Rozměry: 28.0 x 48.0mm
Hloubka montážních otvorů: 5mm
Montážní rozteč otvorů: 19mm x 16mm
Délka hřídele (mimo tělo motoru): 12mm
Průměr hřídele: 4mm
Hmotnost: 120g
|
|
|
|
|
V kombinaci s 10x6 nebo mince 10x7 E-prop tento motor může tlačit nad 1000g tah na 3S1P konfiguraci lipo. Dobré pro větší foamies nebo parkflyer to, kde se vyžaduje cca 150W.
Specifikace:
Kv: 1050rpm/V
Provozní proud: 6A ~ 15A
Špičkový proud: 19A
Navržený vrtule: 10x6, mince 10x7 11x5.5 nebo E-prop
Navržený Baterie: 1300 ~ 2200mAh 3S1P
Hmotnost: 59g
Rozměry: 27,6 x 32mm
Hřídele Velikost: 3,175 mm
Sada obsahuje úplné příslušenství, včetně zlata kulka
|
|
|
|
|
Pokud se vážně zajímáte o výkon u vaší quadrikoptéry, nemusíte hledat nic jiného, než motory AX-4006. Tyto motory jsou osazeny velmi kvalitními 45SH magnety, s vysokým počtem polů, mají širokou možnost montáže a navíc-jsou to motory speciálně určené pro vícerotorové modely.
Motory AX-4006 mají na ose nalisované osazení pro vrtule typu GWS a hliníkové montážní lože pro rychlou a snadnou montáž do rámu quadrikoptéry.
Upozornění: Nejedná se o modifikované letecké motory. Jsou to motory navržené a sestrojené speciálně pro quadrikoptéry.
Specifikace:
Otáčky
|
|
|
|
|
NTM Prop Drive 2830 Series Replacement Shaft
Specification:
Shaft length: 41mm
Shaft diameter: 3mm
|
|
|
|
|
Turnigy L2205-1350 Brushless Motor (100w)
Specification:
Dimension: 28mm x 17mm
Weight: 30g (50g with all fittings, connectors & prop driver)
Kv: 1350rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 100w
Max Current: 13.5A
No load Current: 0.3A
Diameter of shaft: 2.3mm
Thrust: 450g
ESC: 18A
|
|
|
|
|
Turnigy L2508A-3500 Brushless Heli Motor (200w)
Specification:
Dimension: 25mm x 20.5mm
Weight: 31g
Kv: 3500rpm/V
Voltage: 7.2v (2s)
Max Power: 200w
Max Current: 27A
No load Current: 1.1A
Diameter of shaft: 2.3mm
ESC: 30A
|
|
|
|
|
If youre serious about your quad-copters performance, then look no further than the AX-4005.
Built with high-end 45SH magnets, a high pole count and custom motor mount,
this quad-motor is designed purely for multi-rotor applications.
The AX-4005 includes a built in prop saver for GWS style props and a built in aluminum
mount for quick and easy installation on your quadcopter frame.
This is not a modfied aeroplane outrunner.
It was designed from the ground up for quad copters
|
|
|
|
|
S2858-2630 Brushless Inrunner (2630kv)
Specification:
Motor Size: 2858
RPM/V: 2630kv
Max Load: 38A
Max volts: 14.8V 2~4s
Max Watts: 700W
Resistance: 0.0222
Diameter: 28mm
Front Mounting Hole Distance: 16mm or 19mm
Front Mount Thread Size: 16mm M2.5 / 19mm M3.0
Shaft Diameter: 3.17mm
Shaft Length: 14mm
Can Size: 380
Plug type: 3mm Bullet-connector
Weight: 180g
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ
|
|
|
|
|
Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price.Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines.These parts are then gold anodized to provide a beautiful, long-lasting finish.The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses.The stators are epoxy coated to p
|
|
|
|