|
|
|
Upgrade your 1.20 size glow engine model with the Turnigy RotoMax 1.20 Brushless outrunner motor.This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel.
When combined with a 8s Lipoly battery, 19x10" or 20x10" Propeller and a 80Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provi
|
|
|
|
|
Náhradní motor pro Floater-Jet (AXN-2208-2150)
Specifikace:
Otáček na Volt: 2150 ot/V
Max.příkon: 180W
Max. proud: 20A
Max. napětí: 11.1V (LiPo tříčlánek)
Počet závitů: 16
Vnitřní odpor: 0.085Ohm
Typ magnetů: N45SH
Odběr naprázdno: 1.52A
Průměr hřídele: 3mm
Hmotnost: 44g
Doporučená vrtule: 5x5 / 6x4
|
|
|
|
|
Great upgrade motor for 450 class Helicopters suchs as the HK-450.
Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, lo
|
|
|
|
|
Dobře navržený motor s excelentní finalizací a kontrolou kvality.
Model: HXT35-42A
Vstupní napětí: 7,4 V~14,8 V (2~4 články LiPo)
Otáčky: 1450 ot/V
Max. přípustný proud: 45 A po dobu 30 s
Rozměry: 35 mm x 42 mm/1,38 in x 1,65 in
Průměr hřídele: 4 mm/0,16 in
Hmotnost: 132 g
Počet pólů/magnetů: 14
Určen pro modely o hmotnosti: 1000~2300 g / 35~81 oz
Ekvivalent: zážehové motory o objemu .30 to .35 kub.palce
Doporučená vrtule: 11x5
|
|
|
|
|
Specification:
Dimension: 23mm x 18mm, 31mm(with shaft)
Weight: 12g (kv2900) (not including connectors)
Diameter of shaft: F2mm
Length of front shaft: F8mm
Lamination thickness: .2mm
Magnet type: 45SH
Voltage: 7.4V
Amp: 5.8A
Thrust: 165g
Propeller: 6030
|
|
|
|
|
Turnigy L2206A-1650 Brushless Motor (130w)
Specification:
Dimension: 28mm x 21mm
Weight: 37g (50g with all fittings, connectors & prop driver)
Kv: 1650rpm/V
Voltage: 7.2v~11.1v (2s~3s)
Max Power: 130w
Max Current: 17.8A
No load Current: 0.9A
Diameter of shaft: 3mm
Thrust: 620g
ESC: 20A
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ
|
|
|
|
|
Specification:
Kv: 860rpm/v
Operating Current: 6A ~ 17A
Peak Current: 19A
Weight: 72g
Dimensions: 27.6 x 36mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors, prop saver, mount, spare rubber rings, shrink tube and screws.
Performance Data:
Voltage: 11.1V / 11.1V / 11.1V
Current: 12.3A / 16.3A / 17.9A
Prop: 1060 / 1070 / 1147
Thrust: 800g / 970g / 1040g
|
|
|
|
|
AX-2306N-2000
Střídavý mikromotor
Včetně přípravku pro zadní montáž (viz obr.).
Specifikace:
Otáčky na Volt: 2000 ot/V
Baterie: 2 - 3 články LiPo
Doporučená vrtule: 5x3
Proud pro max. účinnost: 6A ~ 9A
Hmotnost: 37g
Rozměr statoru: 23x6 mm
Testovací data:
Použitá baterie: 11.5V
Proud: 7.3A
Vrtule: 5x3
Tah: 357g
Otáčky: 19340ot/min
|
|
|
|
|
Vzhled může klamat. Tento motor s oběžným pláštěm je cca dvakrát větší než "zvonkový" motor Towerpro a otáčí mnohem větší vrtulí.Tento motor je použitý v některých nových modelech letadel firmy Art-tech, takže je testována jejich výdrž, snadné použití a kvalita.
Při použití vrtule 11x4.7 SF motor DT700 dává tah více než 900 g.
Skvělý pro větší modely vyrobené z pěnových materiálů a pro modely typu park flyer.
Specifikace:
Vyžadované napětí: 11.1V
Doporučená kapacita baterií: více než 1300 mAh
Doporučená vrtule:10x4.7, 11x3.8 nebo 11x4.7
Maximální pr
|
|
|
|
|
Combined with a 10x6 E-prop this motor can push out over 1000g in thrust on a 3S1P
configuration lipo.Good for bigger foamies or parkflyers where about 150W is required.
Specification:
Kv: 1050rpm/V
Operating Current: 6A ~ 16A
Peak Current: 19A
Weight: 56g
Dimensions: 27.6 x 32mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors, prop saver, mount,
spare rubbe
|
|
|
|
|
Specification:
Dimension: 27mm x 29mm, 41mm(with shaft)
Weight: 38g (kv3800) (not including connectors)
Diameter of shaft: 2.3mm
Length of front shaft: 13mm
Lamination thickness: .2mm
Magnet type: 45SH
Max performance
Voltage: 2-3S
Prop: APC4.1x4.1
Thrust: 330g
Power: 260W
For 300~500g Funjet style airplane.
|
|
|
|
|
Designed to be a direct swap out for your 15 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 15 size glow engine.
Specification:
Battery: 3 ~ 4 Cell / 11.1V ~ 14.8V
RPM: 810kv
Max current: 42A
No load current: 11V / 1.5A
Internal resistance: 0.03 ohm
Weight: 152g (not including connectors)
Diameter of shaft: 5mm
Dimensions: 73x35mm
Test Data:
1
|
|
|
|
|
Brushless main motor for micro heli (suites MCPX, FBL100)
Specification:
RPM/V: 14000KV
Stator Diameter: 11mm
Stator Length: 4mm
Voltage: 3~5V
No Load Current: 0.65A
Max Current: 5A
Max Watts: 20W
Weight: 4.5g
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 77 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1380kv
Max current: 7A
No load current: 8V/0.4A
Current capacity: 9A/15sec
Internal resistance: 0.33 ohm
Weight: 24g (not including connectors)
Diameter of shaft: 3mm
Dimensio
|
|
|
|