|
|
|
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sint
|
|
|
|
|
Turnigy L2215J-900 Brushless Motor (200w)
Specification:
Dimension: 28mm x 30mm
Weight: 61g (76g with all fittings, connectors & prop driver)
Kv: 900rpm/V
Voltage: 11.1v (3s)
Max Power: 200w
Max Current: 18A
No load Current: 0.6A
Diameter of shaft: 3mm
Thrust: 820g
ESC: 20A
|
|
|
|
|
This motor is specifically designed for the 450/500 helicopter range and a perfect fit for any of our HK450/500 helicopters.
Specification:
Model: 2223
Turns: 4
Cells: 2~3S
Kv: 4400rpm/V
No load Current: 5.2A/10V
Max power: 600W
Weight: 82g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 42mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
Turnigy Typhoon 2218H Brushless 450-Size Heli Motor 3450kv
Specification:
Dimension: 37mm x 28mm, 54mm(with shaft)
Weight: 71g (kv3450) (not including connectors)
Voltage: 2-4S
Diameter of shaft: 3.17mm
Length of front shaft: 16mm
ESC: 40A
Turnigy Typhoon 2218H for 450 class Helicopters.
|
|
|
|
|
This motor is specifically designed for the 450/500 helicopter range and a perfect fit for any of our HK450/500 helicopters.
Specification:
Model: 2223
Turns: 5
Cells: 2~3S
Kv: 3500rpm/V
No load Current: 3A/10V
Max power: 600W
Weight: 82g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 42mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sint
|
|
|
|
|
This motor is specifically designed for the 450 helicopter range and a perfect fit for any of our HK450 helicopters.
Specification:
Model: 2218
Turns: 6
Cells: 2~4S
Kv: 2100rpm/V
No load Current: 1.9A/10V
Max power: 500W
Weight: 67g
Shaft diameter: 3.17mm
Dimensions: 27.2 x 36.5mm
Recomended ESC: 2~4S/50A
|
|
|
|
|
TP 2415-09T Brushless Heli Motor 2700kv
Upgrade that heli today. Increase torque and speed with this 9T motor.
Motor comes with cooling fins as standard.
Specification:
Shaft: 3.175mm
Speed: 2700rpm/v (Kv)
Size: 28x50mm (length includes shaft)
Weight: 73g
Voltage: 2-3S1P
Idle Current: 1.7A
|
|
|
|
|
Specification:
Kv: 1050rpm/V
Operating Current: 6A ~ 18A
Peak Current: 18A
Suggested prop: 10 x 6.0 E-prop
Suggested Battery: 1700mAh ~ 2200mAh 3S1P
Weight: 71g
Dimensions: 27.6 x 36mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors,
prop saver, mount, spare rubber rings, shrink tube and screws.
|
|
|
|
|
Designed to be a direct swap out for your 10 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 10 size glow engine.
Specification:
Battery: 2~3 Cell / 7.4~11.1V
RPM: 1100kv
Max current: 32A
No load current: 10V / 2.10A
Current capacity: 42A / 15sec
Internal resistance: 0.04 ohm
Weight: 149g (not including connectors)
Diameter of shaft: 5mm
Dimensio
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from de
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 250 watts brushless outrunner.
Specification:
Battery: 2~3 Cell /7.4~11.1V
RPM: 850kv
Max current: 28A
No load current: 11V/0.9A
Internal resistance: 0.09 ohm
Weight: 80g (not including connectors)
Diameter of shaft: 4mm
Dimensions: 34.7x36.9mm
Required
|
|
|
|
|
D2826-6 2200kv Outrunner Motor
Specification:
Rpm/V: 2200kv
Shaft: 3.17mm
Voltage: 2S~3S (7.4v to 11.1v)
Weight: 50g
Watts: 342w
Max Current: 34A
ESC: 40A
Suggested Prop: 7x4(2S) ~ 5x5 (3S)
Mounting Hole Bolt Circle: 16mm or 19mm
|
|
|
|
|
Specification:
Shaft Size: 3.17mm~14mm / 2.3mm~14mm (two shaft sizes included)
Motor Dimensions: ³28mm~29mm
Weight: 43g
Kv: 3500rpm/V
Battery: 2-3cell Lipo (7.4-11.1v)
Opperating Current: 8-16A
Peak Current: 19A
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from de
|
|
|
|