|
|
|
Designed to be a direct swap out for your 32 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 32 size glow engine.
Specification:
Battery: 3~4 Cell /11.1~14.8V
RPM: 600kv
Max current: 60A
No load current: 11V/1.3A
Internal resistance: 0.036 ohm
Weight: 202g (not including connectors)
Diameter of shaft: 5mm
Dimensions: 72x42mm
Test Data:
14.8v -
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure produ
|
|
|
|
|
Specification:
For 2-3 Li-Poly Cells (7.2-12.6V)
Recommended props: 9 x 4.7, 10 x 4.7, 11 x 4.7 Slow Flyer
31 mm diameter x 46.5 mm length
Maximum current: 12A
Weight: 66.7 grams / 2.35 oz (everything shown in picture including gray gear box housing)
Comes with stick mount plastic frame
Firewall mount capable
Comes with two prop nuts and one washer
3mm shaft diameter
10mm x 10mm stick mount
Kv: 890
12 Stator Poles, 14 Magnets
This is a great slowfly motor. Excellent for GWS gearb
|
|
|
|
|
Turnigy L5055A-400 Brushless Outrunner 400kv
Specification:
Dimension: 50mm x 55mm
Weight: 293g (with 4m connectors)
Kv: 400rpm/V
Voltage: 11.1v~29.6v (3s~8s)
Max Power: 1400w
Max Current: 55A
Max Efficiency: 80% @ 30A
No load Current: 1.4A
Internal Resistance: 0.30
Diameter of shaft: 6mm
|
|
|
|
|
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from de
|
|
|
|
|
Vzhled může klamat. Tento motor s oběžným pláštěm je cca dvakrát větší než "zvonkový" motor Towerpro a otáčí mnohem větší vrtulí.Tento motor je použitý v některých nových modelech letadel firmy Art-tech, takže je testována jejich výdrž, snadné použití a kvalita.
Při použití vrtule 11x4.7 SF motor DT700 dává tah více než 900 g.
Skvělý pro větší modely vyrobené z pěnových materiálů a pro modely typu park flyer.
Specifikace:
Vyžadované napětí: 11.1V
Doporučená kapacita baterií: více než 1300 mAh
Doporučená vrtule:10x4.7, 11x3.8 nebo 11x4.7
Maximální pr
|
|
|
|
|
Designed to be a direct swap out for your .60 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Specification:
Battery: 5~7 Cell /18.5~25.9V
RPM: 500kv
Max current: 65A
No load current: 11V/1.9A
Current capacity: 65A/15sec
Internal resistance
|
|
|
|
|
Designed to provide reliable and clean power for 3D parkflyers.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 55 watts brushless outrunner.
Specification:
Battery: 2 Cell /7.4V
RPM: 1680kv
Max current: 8A
No load current: 7.4V/0.20A
Internal resistance: 0.32 ohm
Weight: 16g (not including connectors)
Diameter of shaft: 2mm
Dimensions: 22x23mm
Test Data:
7.4v
|
|
|
|
|
Turnigy L3730A-1000 Brushless Motor
Specification:
Dimension: 37mm x 30mm
Weight: 112g Inc 4mm Gold Connector (130g inc all fittings)
Kv: 1000rpm/V
Voltage: 11.1v~14.8v (3s~4s)
Max Power: 580w
Max Current: 42A
No load Current: 1.6A
Diameter of shaft: 4mm
Thrust: 1700g
ESC: 60A
|
|
|
|
|
Turnigy D3542/4 1450KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1450kv
Max current: 48A
No load current: 4A
Max power: 690W
Internal resistance: 0.019 ohm
Weight: 130g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x42m
Prop size: 7.4V/12x6 14.8V/10x7
Max thrust: 1420g
|
|
|
|
|
Designed to be a direct swap out for your 32 size glow engine.
This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 32 size glow engine.
Specification:
Battery: 3~4 Cell /11.1~14.8V
RPM: 770kv
Max current: 42A
No load current: 10V/2.4A
Current capacity: 55A/15sec
Internal resistance: 0.02 ohm
Weight: 212g (not including connectors)
Diameter of shaft: 5mm
Dimensions: 72
|
|
|
|
|
Specification:
Kv: 1050rpm/V
Operating Current: 6A ~ 18A
Peak Current: 18A
Suggested prop: 10 x 6.0 E-prop
Suggested Battery: 1700mAh ~ 2200mAh 3S1P
Weight: 71g
Dimensions: 27.6 x 36mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors,
prop saver, mount, spare rubber rings, shrink tube and screws.
|
|
|
|
|
Turnigy D3536/6 1250KV Brushless Outrunner Motor
Specification:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1250kv
Max current: 34A
No load current: 3A
Max power: 500W
Internal resistance: 0.034 ohm
Weight: 102g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x36m
Prop size: 7.4V/10x5 14.8V/9x4.7
Max thrust: 1270g
|
|
|
|
|
The Turnigy Aerodrive DST-1000kv motor is ideal for the flyer who requires a powerful lightweight motor for park flyer or Multi-rotor use.
Specification:
Kv: 1000 rpm/V
Voltage: 7.4 ~ 11.1V (2~3s)
No load Current: 1.0A
Max Current: 14A
Max Power: 140W
Shaft Size: 3mm
Shaft Length: 17mm
Dimension: 32.7mm x 30.3mm
Thrust: 770g
Weight: 65g
|
|
|
|
|
C1818 Micro brushless Outrunner 3500kv (9g)
Specification:
Diameter: 18mm
Length: 19mm
Shaft: 4mm
Weight: 9g (with 10cm wire)
Power: 40W
Turns: 25
Resistance: 493
Idle Current: 0.3A
Max amp: 10A (15sec burst)
Voltage: 2-4cell Lipoly
|
|
|
|